Digital Information Center (Hand-Held Unit) Observe your hydraulic system's vital operating parameters with this portable, digital information center (DIC). Controlled by eight buttons, the 4-digit LCD monitor displays pressure, peak pressure, flow, temperature, and speed. Protected by a rubber cover, the DIC can be used in both a lab environment or under extreme field conditions. Use the DIC to Measure: Pressure (up to 9000 PSI [630 bar] via the pressure transducer) Flow (up to 156 GPM [590.5 Lpm] via the flow turbine) Temperature (up to 257º F [125º C] via the temperature sensor) Rotational Speed (20-10,000 RPM via the rotational speed sensor) Specifications: Compact- measures 5.7" x 2.75" x 1.57" (145 mm x 70mm x 40mm) Accuracy: <0,3%± 2 Digit Lightweight- weighs 0.75 lbs (340g) Automatic recognition of sensors connected to it Clear, 4-digit LCD display- character height: 0.5" (13mm) Rechargeable battery (model HC-DIC-04AP only) Auto power off after 15 minutes ABS plastic housing protected with rubber glove with integrated stand and carry straps Pressure tranducer enables direct connection to pressure test connectors

Part Number	Description	Price
HC-DIC-04B	Digital Information Center (DIC) - Battery powered	$525.00
HC-DIC-04AP	Digital Information Center (DIC) - Powered by rechargeable battery, including external power supply and data output	$725.00
HC-KNG-04-110	External power supply 110V (optional)	$90.00
HC-KNG-04-220	External power supply 220V (optional)	$90.00

Pressure Transducer The pressure transducer connects to any standard STAUFF® Test 20 connector and relays system pressure to the Digital Information Center. Pressure Transducers do not include connecting cable or test point adapter Media temperature range: -13º to 221º F (-25º to 105º C) Stainless-steel Measures differential pressure (See Note) Ambient temperature range: -4º to 185º F (-20º to 85º C) Part Number Pressure Rating Price HC-PTD-015 -15 to 210 PSI (-1 to 15 bar) $395.00 HC-PTD-150 0 to 1450 PSI (0 to 150 bar) $380.00 HC-PTD-400 0 to 5800 PSI (0 to 400 bar) $380.00 HC-PTD-600 0 to 8700 PSI (0 to 600 bar) $380.00 HC-DIC-CAB3 Connecting Cable 3m (10 ft) $135.00 HC-DIC-CAB5 Extension Cable 5m (16 ft) $150.00 HC-PTD-G1/2-T20 Connection Adapter to Stauff Test 20 $11.00 *Note: In order to measure differential pressure, two tranducers of the same pressure range must be used.

Flow Turbine The flow turbine is used in conjunction with the Digital Information Center to record system oil flow via the signal converter which is supplied with unit.
Media temperature range: -4º to 302º F (-20º to 150º C) Surface treatment: black anodized Material housing: aluminum Flow Turbines do not include connecting cable

Part Number	Flow Rating	Port Size	Price
HC-SFM-015	0.26 - 3.9 GPM (1.0 - 15 Lpm)	#8 SAE	$1570.00
HC-SFM-060	1.95 - 15.6 GPM (7.5 - 60 Lpm)	#12 SAE	$1570.00
HC-SFM-150	1.95 - 36.6 GPM (7.5 - 138.5 Lpm)	#12 SAE	$1570.00
HC-SFM-300	3.9 - 78 GPM (15 - 300 Lpm)	#16 SAE	$1570.00
HC-SFM-600	7.8 - 156 GPM (30 - 600 Lpm)	#20 SAE	$1570.00
HC-DIC-CAB3	Connecting Cable 3m (10 ft)	-	$135.00
HC-DIC-CAB5	Extension Cable 5m (16 ft)	-	$150.00

Load-Cell Assembly The load-cell assembly can be combined with the flow turbine to produce an artificial load (pressure) for testing hydraulic systems and components which cannot be "loaded."
SAE ports Adaptor for connection to flow turbine is included 5000 PSI (345 bar) working pressure

Part Number	Description	Price
HC-LCA-015	Load cell assembly with connector for HC-SFM-015 Rated for 5000 PSI (345 bar)	$65.00
HC-LCA-060	Load cell assembly with connector for HC-SFM-060 and HC-SFM-150 Rated for 5000 PSI (345 bar)	$91.00
HC-LCA-300	Load cell assembly with connector for HC-SFM-300 Rated for 5000 PSI (345 bar)	$219.00
HC-LCA-600	Load cell assembly with connector for HC-SFM-600 Rated for 5000 PSI (345 bar)	$333.00

Rotational Speed Sensor Rotational speed measurement (RPM) is made possible with the use of the SDS 04 non-contact sensor. Speed measured using a photoelectric cell which counts revolutions via a reflecting strip or marking on the rotating surface resulting in a high level of accuracy.
Specifications: Measuring range: 20-10,000 RPM Accuracy: <0.5% Measuring distance: 1"-24" (25-600 mm) A contact sensor and special focusing adaptor is available

Part Number	Description	Price
HC-SDS-04	Rotational speed sensor with Integrated Connecting Cable - 3m (10 ft)	$765.00
HC-SDS-CA	Contact adaptor for speed sensor	$180.00
HC-SDS-FA	Focusing adaptor for speed sensor	$130.00

Temperature Sensor Use to measure temperatures in your hydraulic system.
Measuring range: -13º to 257º F (-25º to 125º C) Maximum working pressure: 9000 PSI (630 bar) Accuracy: ±1.5% Full Scale Cable Length: 78" (2 m) Response time: approx. 7 s JIC connector (1-1/16"-12 UNF) available

Part Number	Description	Price
HC-DIC-TS	Temperature sensor without connecting cable	$270.00
HC-DIC-TS-JIC	JIC straight fitting with connection for temperature sensor - M10x1	$13.80

Carry-Case Keep your Digital Information Center and accessories safe from the harsh elements found in work environments with one of our rugged carry-cases. The HC-DIC-CC1 is the same case and foam insert used in our HC-TK100 test kit. It is designed to hold the Digital Information Center, flow turbine, load-cell, pressure transducers, and connecting cable. The HC-DIC-CC2 is a lightweight carry-case made to hold the Digital Information Center, external power supply, up to three pressure transducers, and three STAUFF® test adaptors.

Part Number	Description	Price
HC-DIC-CC1	Lockable, heavy-duty, dust-proof, water-proof carry-case with foam insert	$299.00
HC-DIC-CC2	Light-weight carry-case with foam insert (does not accomodate Load Cell asembly or Flow Turbine)	$92.00