|
|
|
|
Pressure/Leak Test Manifolds for Industrial Subplate-Mounted Valves
HYDRA-CHECK™'s exclusive Pressure/Leak Test manifolds offer the ONLY way to bench-test subplate-mounted valves safely and effectively!
If testing a subplate-mounted valve on the machine is impractical, simply remove it and bench-test it using a pressure/leak test manifold, in just a few minutes!
Test DO3, DO5, and DO8 valves quickly and effectively with HYDRA-CHECK™'s simple-to-use manifolds!
HYDRA-CHECK™'s pressure/leak test manifolds come with cover plates to keep them free from contamination when not in use. The cover plates can also be used to stop oil from leaking when a valve is removed for testing (the cover plate can be substituted for the valve when the valve is off the manifold).
|
The companion product, "Troubleshooting Hydraulic Components Using Leakage Path Analysis Methods" (shown at right) will guide you step-by-step through the procedures used for pressure/leak testing the vast majority of components found in your hydraulic system(s).
This book is an absolute must for anyone wanting to troubleshoot and pinpoint problem components in their hydraulic machinery! |
|
DO3 Pressure/Leak Test Manifold
 |
7/16 SAE (#4) gauge ports |
|
Pressure rating 3000 PSI (207 bar) |
|
"A" and "B" gauge ports |
|
 |
| Part Number |
Pressure |
Price |
|
| HC-DO3-TM |
0 - 3000 PSI (207 bar) |
$70.00 |
|
DO5 Pressure/Leak Test Manifold
|
7/16 SAE (#4) gauge ports |
|
Pressure rating 3000 PSI (207 bar) |
|
"A" and "B" gauge ports |
|
 |
| Part Number |
Pressure |
Price |
|
| HC-DO5-TM |
0 - 3000 PSI (207 bar) |
$65.00 |
|
DO8 Pressure/Leak Test Manifold
|
7/16 SAE (#4) gauge ports |
|
Pressure rating 3000 PSI (207 bar) |
|
"A" and "B" gauge ports |
|
 |
| Part Number |
Pressure |
Price |
|
| HC-DO8-TM |
0 - 3000 PSI (207 bar) |
$140.00 |
|
|
|
