Additional information
| Weight | 2.7 lbs |
|---|---|
| Dimensions | 9 × 5 × 9 in |
| Pressure Gauge | 3000 PSI |
| Hose Length | 8 ft. (2.4m) |
Accumulator Nitrogen Charging Assembly
$399.75
The HydraCheck accumulator nitrogen charging assembly is used for charging accumulators with a Schrader-style (Vg8, .305-32) valve connection.
This 3000 PSI (207 bar) accumulator nitrogen pre-charge test consists of:
Gauge Assembly
- Drain cock
- Tank valve
- 3000 PSI (207 bar) pressure gauge with rubber boot
- Gauge block
- Gas cock (Schrader valve style connection to accumulator [Vg8, .305-32])
Charging Hose Assembly
- Connector, Male, RH thread (standard)
- Tailpiece, Male (standard)
- 8 feet (2.4m) hose
- Gas chuck.
Warning: To avoid injury use a Pressure Regulator on your nitrogen bottle when charging an accumulator with a charging kit.
Out of stock
