Additional information
| Weight | 31 lbs |
|---|---|
| Dimensions | 23 × 13.75 × 10.5 in |
Clean Seal System – Bench Top Heat Shrink Machine
$5,845.85
The Clean Seal System utilizes heat shrink technology to encapsulate the end of a hose or tube assembly with a Clean Seal Capsule. This eliminates possible re-contamination that is problematic with traditional capping and plugging methods.
Re-contamination occurs when ill-fitting caps and plugs are forced onto assemblies, causing plastic particles to shear off into the hose or tube. The Clean Seal System leaves your assemblies 100% contamination-free and provides an easier, less costly, and more effective solution than traditional capping methods. You’ll never have to deal with an excessive cap and plug-inventory again!
Features and Benefits:
- Even heat distribution for a perfect capsule shrink-fit every time
- Accepts Clean Seal Capsules from 3/4″ I.D. (20mm) through 3″ I.D. (80mm)
- Works with fitting hex sizes from 12mm (½”) through 78mm (3”)
- Using Clean Seal Capsules helps protect fitting threads and seals from damage
- The operator can use both hands to push the hose assembly into Shrink Tunnel
- Small and Large Magnetic Pucks hold the capsules against the fitting end for secure application
- Oversized Air knife Diffuser opening allows multiple assembly ends at once
- The heating unit is thermocouple protected against overheating
- Brushless DC blower motor for trouble-free operation
- Locking 3-wire grounding power main plug NEMA L6-15 for safe 230VAC connection
- Greenlighted Power On/Off rocker switch lets you know when the Power is on
- The system is 100% duty cycle rated for 24/7 continuous operation
- Cool Air In the Vent helps keep heating air clean
- Operates on 230v single-phase AC power at 50/60Hz and draws <10 amps
Technical Data:
- Power Consumption: 3400 W
- Voltage: 230V for 50AC/60Hz
- Heater Temperature: 450°F (232°C)
- Duty Cycle: 100%
- Air Flow (at 20°C): 350 LPM (12 CFM)
- Noise Emission: <65 LpA (dB)
- Conformity: CE
Note: This product is in conformity with standards of low voltage in accordance with the regulations 73/23/EEC, 89/336/EEC
