Microbore Hose Assembly, Test 20 (M16x2), 60″

$37.11

There may be times when you want to check your hydraulic system’s pressure but the test connector is too close to a moving part, making the task too dangerous. Or perhaps you might want to sit in the operator’s seat of a piece of mobile equipment to monitor the machine’s performance. Either way, the microbore hose assembly is designed to make remote pressure observation safe and convenient.

Measuring approximately 1/4″ (5mm) in diameter and extremely lightweight, microbore hose is available in various lengths for your convenience and connects to any STAUFF® Test 20 (M16x2) connector. A hose union (HC-SSV-2020) is required to connect a microbore hose assembly to a direct gauge adaptor (HC-DGA).

Specifications:

  • Nominal Bore: DN 2
  • Maximum Working Pressure: 9000 PSI (630 bar)
  • Minimum Bursting Pressure: 27000 PSI (1900 bar)
  • Working Temperature Rating: -31 to +212°F (-35 to +100°C)
  • Inside Diameter: 0.08″ (2mm)
  • Outside Diameter: 0.2″ (5mm)
  • Reinforcement: Synthetic Fiber
  • Media: Suitable for hydraulic oils and other mineral based fluids
SKU: HC-HA-060 Category:

Additional information

Weight0.3 lbs
Dimensions6.5 × 1 × 6.5 in
Length

60 in
1524 mm

Maximum Working Pressure

9000 PSI
630 Bar