Digital Hydraulic Datalogger – Service Master Plus, 2 CAN Lines, 3 SR Sensors


The Service Master Plus (HPM6000) combines innovative technology with increased overall capabilities to bring you a premier diagnostic instrument. This new tool is more than just a meter; it incorporates data measurement, display, and on-screen analysis to provide increased functionality that extends far beyond standard meters currently on the market.

The series includes three models, allowing the user to choose the model with the right number of inputs for their application and budget. All models of this easy-to-use diagnostic test system provide the user with an invaluable data logger for research and development testing, pre-dispatch inspection, preventive maintenance, as well as fault-finding poor system performance and capturing harmful pressure spikes. All units are designed for measuring, displaying, data-logging and exporting hydraulic data for further analysis on a PC. The Service Master Plus is truly a user-friendly, versatile, diagnostic instrument for any fluid power system.

Service Master Plus (HPM6000) Features:

  • Inputs: 2 CAN lines – max of 8 sensors per line – 16 sensors in total (up to 32 channels), 3 SR sensors ( up to 6 channels), 2 configurable auxiliary inputs
  • Up to 4 million readings per test l Complete range of sensors – pressure, flow, temperature, tachometer
  • Intelligent Digital sensors (CAN protocol) for easier wiring and auto configuration
  • Analogue sensor inputs including SR range, mA, volts
  • Internal storage for over 36 million readings – expandable to over 1 billion readings
  • Four modes of data-logging; Logging interval of 1 ms to 24 hours; Re-chargeable internal battery – mains charger included; Full color 5.7 inch display; IP64 and rubberized case surround for protection in harsh environments
  • Complete with HPComm – PC software l Connectivity – USB Host, USB slave, Ethernet


Technical Data:

  • Display: TFT-colour LCD – 4.53” x 3.38”; Visible Area: 115 x 86 mm; Resolution 640 x 480 pixels
  • Memory: Memory capacity: ≤4 million measured values per measurement; Total measured value memory >1 billion measured values
  • Functions: Measuring mode: Start/stop, points, trigger; Measurement: ACT, MIN and MAX; Measurement display: Numerical, bar graph, pointer, curve graph; Trigger: Slope, manual, level, window, time, logic, Pre-Trigger; Remote operation via the Ethernet; Acoustic notification at any incident
  • Interfaces: Online data transmission between unit and PC via HPMComm; USB standard: 2.0, full-speed Push-in connection: USB socket, shielded, type B; Connection for mass storage devices such as USB memory stick or removable hard disc standard: 2.0, full-speed, 100 mA max. Push-in connection: USB socket, shielded, type A
  • Battery: Lithium Ion pack, +7.4 V DC / 4500 mAh; Battery life: >8 hours; Recharge time: 3 hours
  • Dimensions: 10.12 x 7.13 x 2.95 in (257 x 181 x 75 mm)
  • Operating Temperature: 32°F – 122°F (0°C – 50°C)
  • Storage Temperature: -13°F – 140°F (-25°C – 60°C)
  • Relative Humidity: <80%
  • Environmental Assessment: DIN EN 60068-2-32 (1 m free fall)
  • Protection Category: IP 64 protection rating: Dust tight and protected against splashing water

Additional information

Weight 3.6 lbs
Dimensions 11 × 9 × 4 in

2 CAN lines – max of 8 sensors per line – 16 sensors in total (up to 32 channels), 3 SR sensors ( up to 6 channels), 2 configurable auxiliary inputs