The 42545 is a High-Temperature IR Thermometer that measures up to 1832°F (-50 to 1000°C) with a 50:1 distance to target ratio and laser pointer that identifies the target area. A High 50:1 distance to target ratio measures smaller surface areas at greater distances for safe and accurate readings. Large backlit LCD display. Adjustable emissivity. Complete with 9V battery and carrying case.

Wide temperature range from -58°F to 1832°F (-50°C to 1000°C) Built-in laser pointer for easy targeting Large backlit LCD display Adjustable emissivity High resolution of 0.1° up to 199.9° Adjustable high/low alarm alerts user visually and audibly when the temperature exceeds programmed limits MIN/MAX/AVG/DIF features display highest, lowest, average, and MAX minus MIN values Automatic data hold Auto power off Complete with 9V battery and hard carrying case

Specifications:…

$329.99
Add to cart
Add to Quote

The Shimpo PT-110 Non-Contact Laser Tachometer is a simple to use, ergonomic, rugged test instrument that operates with optical laser technology. This velocity analyzing and measuring device is ideal for rotational machine inspection and process speed analysis. The PT-110 possesses a large backlit LCD screen that provides clear viewing in any environment. Users can obtain results in either Hertz or RPM, as well as Total counts with the simple selection switch. During testing, the unit automatically saves maximum, minimum, last recorded values and up to 96 logged data readings. The compact, lightweight PT-110 Tachometer comes standard with reflective tape, 3 AAA batteries and protective carrying case.

$125.00
Add to cart
Add to Quote

The laser-enabled DT-207LR has precise RPM measurement up to 20 feet. The Series DT-207LR digital tachometers incorporate laser technology yet retain our hallmark rugged construction and reliable quality components. Units offer incredible value and versatility as they can operate in non-contact and contact applications.

$305.00
Add to cart
Add to Quote

The Shimpo DT-2100 is the premium tachometer for engineers and maintenance professionals, the most highly advanced tachometer ever. Providing an unequaled level of user flexibility, the DT-2100 is the premium tachometer for engineers and maintenance professionals. Aiding the diagnosis of the most difficult machinery measurements with its on-board data-logging, graphing and statistical analysis, the user can examine the results of their testing on site and determine if additional data is required. Data can be downloaded to the optional software to further analyze and diagnose system performance. If simplicity is required, the DT-2100 can accommodate with its selectable display styles allowing results to be viewed in standard numerical, chart, bar graph or gauge modes. Max., Min. and Ave. can be quickly scrolled through in any display mode for additional test feedback.

$345.00
Add to cart
Add to Quote

ST-1000 is a Stroboscope-Tachometer with LED flash technology. This velocity analyzing and measuring device is ideal for rotational machine inspection. The stroboscope is capable of flashing the light in a synchronous frequency to the operating machinery, creating the illusion of viewing stopped or slowed images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted rate of the ST-1000’s flashing light, machine parts and processes may be inspected for defects. Plus, the rotational speed of the machinery and systems may be recorded for further performance analysis.

$209.00
Add to cart
Add to Quote

The DT-326B is a portable, light-weight Phase Shifting Stroboscope utilizing super bright, high powered CREE LED lamps.

The DT-326B’s LED array provides a bright, stable strobe light over a wide measurement range with a lifetime far exceeding xenon lit stroboscopes. Containing a rechargeable lithium battery, a single charge can last up to a full 12 hours of operation.The DT-326B is designed for speed and frequency measurements in motion and vibration analysis applications.

These features make the DT-326B perfect for speed and frequency measurements in predictive and preventive maintenance applications such as: motors, shafts, rotogravure printing, extruders, blow molding, wire lettering and striping, engraving, pulse jets, water jets, fans, cams, gear teeth, belt inspections, fuel injectors, vibration analysis, spindle spinning, cutting blade timing and sharpness, plus many more in the printing, painting, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries.

Features:…

$695.00
Add to cart
Add to Quote

The DT-365E High-Intensity, Battery Powered LED Stroboscopes are velocity analyzing and measuring devices that are ideal for machinery process inspection. The DT-365E Stroboscopes are capable of flashing their LED lights in a synchronous frequency to the operating machinery, creating the illusion of viewing slowed or frozen images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted flash rate of its LED lights, machine parts and processes may be inspected for defects, aiding in preventative maintenance programs.

$1,250.00
Add to cart
Add to Quote

For use with the Pressure/Leak, Hand-operated Pump

HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with JIC male connectors.
Simply remove the swivel connector and screw in and tighten the HydraCheck® pressure/leak connector – you are ready to test!

Comes with STAUFF Test 20 (M16x2) connector.…

$24.95 – $37.20
View products

For use with the Pressure/Leak, Hand-operated Pump

These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with SAE male connectors – you are ready to test!

Comes with STAUFF Test 20 (M16x2) connector.…

$15.25 – $51.25
View products

For use with the Pressure/Leak, Hand-operated Pump

These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with NPT connectors – you are ready to test!

Comes with STAUFF Test 20 connector.…

$14.05 – $37.50
View products

A single hydraulic system can have components and or sub-systems that operate at different pressures. For example, the pressure in the housing of a hydraulic pump or motor cannot exceed 70-PSI while the system pressure might be 6000-PSI. It is not possible to use a 6000-PSI analog gauge to read pressures as low as 70-PSI. Also, a vacuum gauge is needed to check the health of a hydraulic pump’s inlet.

There are instances when more than one pressure gauge is needed to set up and/or troubleshoot a hydraulic system.  The Snap-Check pressure gauge test kit is ideal for this purpose. Gauge scales (pressures) can be changed to suit your unique requirements. The kit also consists of 60” Microbore hoses, which allow technicians to observe pressure while keeping them a safe distance from moving parts. They also allow technicians to observe pressures while operating a machine, which in the case of hydrostatic transmissions is oftentimes necessary.

Shipped to you in a…

$945.51
Add to cart
Add to Quote

With a turn of the knob, the valve allows inline sampling of system fluids without system shutdown, in little time, and without the worry of fluid contamination.

For best results, the HC-FD15 oil sampling valves should be installed in dynamic fluid lines in low pressure and return lines. If only one sampling point can be chosen, it should be in the return line, upstream of any return line filter. This will ensure a representative sample of the present condition of all components in the system.

The Aeroquip® oil sampling valve is designed for use with engine oil, lubricating oil, transmission fluid, and hydraulic fluids in mobile construction equipment, military vehicles, trucks, and stationary equipment.

Easy to Operate:
Remove the metal dust cover on the discharge port. Discharge approximately 200ml of oil to flush the sampling valve by turning the knurled knob 1/4 turn to the right. Dispose of this sample in the appropriate manner. Locate a clean oil sample…

$203.30 – $263.16
View products

The easier it is to perform preventive maintenance, the more likely it will happen. Taking samples of system fluids couldn’t be simpler or more reliable, without system shutdown, using the WearChek oil sample valve. Only Wear Chek offers easy push-button control – just push and release for sampling engine oil, transmission fluid, and hydraulic fluids. Double Seal construction and automatic positive closing ensure zero-leak performance in return lines and blocks, oil galleries, and pilot circuits. And, the one-piece T-shaped design is not only rugged but compact as well, facilitating installation where space is limited.

Help extend the usable life of critical fluid power systems. Encourage a regular sampling program using the WearChek valve.

Available in 1/8″ NPT, 1/4″ NPT, and 1/4″ BSPT male connections.

NOTE: This valve is not intended for aerospace applications

 …

$64.50 – $69.05
View products

HydraCheck’s Oil Sampling Kit (SFSK-1) makes oil sampling easy (up to 300 PSI [20.7 bar]) with the fluid sample pump that can be used with any M16x2 test point. The kit comes with both standard and international test point connections. The mailable, oil sample bottles are also available for purchase in packs of 10 or 1.

An oil sampling kit is a valuable tool for monitoring the condition of machinery and systems. By collecting a small sample of oil and analyzing it for potential problems or issues, you can take proactive measures to prevent breakdowns and failures. This preventative maintenance can increase the lifespan of your equipment and reduce downtime, saving you time and money in the long run. Additionally, oil sampling kits can be useful for troubleshooting specific issues by identifying the root cause of problems or failures. Incorporating oil sampling into your maintenance routine can improve…

$389.00
Add to cart
Add to Quote

Fluid analysis is a crucial part of any oil management program. For your convenience, Stauff’s oil analysis bottles are pre-addressed and postage-paid mailable.

Simply take your oil sample, fill out the enclosed questionnaire, place the entire contents into the mailable bottle and drop the entire package in the mail. Your test results will be mailed directly back to you.

The test includes:

$74.54 – $745.40
View products

Stop flange size confusion in its tracks!

This immensely useful template will enable you to measure flange O.D. and flange head height. There are subtle differences between SAE Code 61, 62 and Caterpillar® flanges that are not readily identifiable. An error in application could result in an accident that could cause severe injury or death.

Assembly-line personnel, engineers, field service personnel, sales personnel and draftspersons will find this instrument invaluable in getting flange identification right the first time!

Ask about how you can get personalized templates with your company logo/name. …

$16.95
Add to cart
Add to Quote

The Gates™ International Thread Identification Kit will put an end to all your connector identification confusion and conveniently fits in your pocket.

Kit includes:

Instruction Booklet: This pocket-sized book has all the information you need to make the job of correct connector identification simple and straightforward. Instructions on exactly how to use the kit are included. Detailed illustrations help you visually identify what type of connector you have and exactly what size it is. Vernier Caliper: A compact, stainless-steel caliper measures inside and outside diameters. Thread Gauges: Two thread gauge clusters measure and identify metric and American threads. Angle Gauge: Stainless-steel angle gauge quickly and accurately measures seat angles, e.g., 37º and 45º.

 …

$125.50
Read more

Hose, tube & pipe cleaning systems offer a fast, less invasive way to clean contaminated lines & assemblies using pneumatic technology. Perfect for mobile applications or the occasional user. The 1-1/4” launcher was designed as a cost-effective cleaning solution for handling most of the applications that are encountered every day in the workplace. The unit removes rubber dust and metal particles from the cutting process, metal flash from the crimping process, and contaminated oil from hoses, tubes, and pipes in hydraulic systems. This is all accomplished using the pneumatic launcher with the correct-sized foam projectile. We offer the launcher gun by itself or 2 economical kits to get you started.

Features & Benefits…

$291.57 – $1,191.53
View products

Cleaning hose, tube, or pipe has never been easier using our UltraClean launcher kits! Cleaning just takes seconds to perform giving you the ability to clean to ISO 13/10 levels. Hose, tube & pipe cleaning systems offer a fast, less invasive way to clean contaminated lines & assemblies using pneumatic technology.

Features & Benefits

$1,030.00 – $2,924.72
View products

Universal application for cleaning hose, tube, pipe, and assemblies. Removes fine particles of loose contamination and can also be used for product purging.

The projectile cleans by being compressed against the internal surface of the hose, tube, or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the internal diameter of the hose, tube, or pipe. For instance, a 2” (50mm) projectile is recommended for a 1-1/2” (38mm) hose.

Individual circumstances may require a smaller or larger projectile. If the projectile is too large it will not leave the nozzle, and if it is too small it will not clean effectively. The enormous variety in the types of couplings available today could also mean in some circumstances that the recommended size is inappropriate. When cleaning assemblies, a reduction in projectile size may be appropriate, as all recommendations are based on the most commonly used coupling sizes.

All Ultra Clean projectiles are made from virgin…

$21.56 – $122.56
View products

For use with all types of tubing or pipes – and strongly recommended for stainless steel – with mild to medium amounts of contamination, surface rust, or scale build-up. Ideal for removing mandrel lubricants, grease, and oil after the bending process.

The Tube style foam is denser than the standard Ultra Clean style foam and resists friction much better. Because of this, Tube Foam works much better on Stainless Steel applications.

The projectile cleans by being compressed against the internal surface of the hose, tube, or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the internal diameter of the hose, tube, or pipe. For instance, a 2” (50mm) projectile is recommended for a 1-1/2” (38mm) hose.

Individual circumstances may require a smaller or larger projectile. If the projectile is too large it will not leave the nozzle, and if it is too small it will not clean effectively. The enormous variety in the…

$31.92 – $71.07
View products