The 42510A mini IR thermometer gives a fast response with high accuracy. It has a larger overall temperature range than our HC-IR270. Adjustable High/Low setpoints with an audible alarm that alerts the user when the temperature exceeds the programmed set points. Adjustable emissivity for better accuracy on a variety of surfaces. Built-in laser pointer identifies target area. Backlighting illuminates display for taking measurements at night or in areas with low background light levels. 12:1 distance to target ratio. Complete with 9V battery and pouch case.

Built-in laser pointer for easy targeting Large backlit LCD display Record/Recall up to 20 readings Data Hold and Min/Max, over-range indicator, auto power-off Complete with 9V battery and pouch

Specifications:…

$109.99
Add to cart
Add to Quote

The 42512 is a dual laser IR thermometer. The 42512 IR thermometer features dual lasers for accurate targeting with a fast (0.15s) response time and has a backlit dual LCD display. Temperature ranges from -50 to 1000°C (-58 to 1832°F). Complete with pouch case and 9V battery.

Dual laser for accurate target Fast 0.15 second response time with Max display At 30″ (76.2cm) distance two laser points converge to 1″ target spot Temperature range: -58 to 1832°F (-50 to 1000°C) White backlit dual LCD display 0.10 to 1.00 adjustable emissivity increases measurement accuracy for different surface 0.1°F/°C max resolution Adjustable high/low alarm alerts user visually and audibly when the temperature exceeds programmed limits Lock function for continuous readings Double molded housing Auto power off Complete with 9V battery and pouch case

Specifications:…

$219.99
Add to cart
Add to Quote

The 42545 is a High-Temperature IR Thermometer that measures up to 1832°F (-50 to 1000°C) with a 50:1 distance to target ratio and laser pointer that identifies the target area. A High 50:1 distance to target ratio measures smaller surface areas at greater distances for safe and accurate readings. Large backlit LCD display. Adjustable emissivity. Complete with 9V battery and carrying case.

Wide temperature range from -58°F to 1832°F (-50°C to 1000°C) Built-in laser pointer for easy targeting Large backlit LCD display Adjustable emissivity High resolution of 0.1° up to 199.9° Adjustable high/low alarm alerts user visually and audibly when the temperature exceeds programmed limits MIN/MAX/AVG/DIF features display highest, lowest, average, and MAX minus MIN values Automatic data hold Auto power off Complete with 9V battery and hard carrying case

Specifications:…

$329.99
Add to cart
Add to Quote

The laser-enabled DT-207LR has precise RPM measurement up to 20 feet. The Series DT-207LR digital tachometers incorporate laser technology yet retain our hallmark rugged construction and reliable quality components. Units offer incredible value and versatility as they can operate in non-contact and contact applications.

$350.00
Add to cart
Add to Quote

ST-1000 is a Stroboscope-Tachometer with LED flash technology. This velocity analyzing and measuring device is ideal for rotational machine inspection. The stroboscope is capable of flashing the light in a synchronous frequency to the operating machinery, creating the illusion of viewing stopped or slowed images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted rate of the ST-1000’s flashing light, machine parts and processes may be inspected for defects. Plus, the rotational speed of the machinery and systems may be recorded for further performance analysis.

$235.00
Add to cart
Add to Quote

The DT-326B is a portable, light-weight Phase Shifting Stroboscope utilizing super bright, high powered CREE LED lamps.

The DT-326B’s LED array provides a bright, stable strobe light over a wide measurement range with a lifetime far exceeding xenon lit stroboscopes. Containing a rechargeable lithium battery, a single charge can last up to a full 12 hours of operation.The DT-326B is designed for speed and frequency measurements in motion and vibration analysis applications.

These features make the DT-326B perfect for speed and frequency measurements in predictive and preventive maintenance applications such as: motors, shafts, rotogravure printing, extruders, blow molding, wire lettering and striping, engraving, pulse jets, water jets, fans, cams, gear teeth, belt inspections, fuel injectors, vibration analysis, spindle spinning, cutting blade timing and sharpness, plus many more in the printing, painting, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries.

Features:…

$725.00
Add to cart
Add to Quote

For use with the Pressure/Leak, Hand-operated Pump

HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with JIC male connectors.
Simply remove the swivel connector and screw in and tighten the HydraCheck® pressure/leak connector – you are ready to test!

Comes with STAUFF Test 20 (M16x2) connector.…

$24.95 – $37.20
View products

For use with the Pressure/Leak, Hand-operated Pump

These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with SAE male connectors – you are ready to test!

Comes with STAUFF Test 20 (M16x2) connector.…

$15.25 – $51.25
View products

For use with the Pressure/Leak, Hand-operated Pump

These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with NPT connectors – you are ready to test!

Comes with STAUFF Test 20 connector.…

$14.05 – $37.50
View products

Our Digital Pressure Gauge Test Kit is intended to measure and display pressures in hydraulic systems. The digital gauge can display the current measured values, as well as minimum and maximum values, with an accuracy of 0,5 % of full scale.

The Digital Pressure Gauge Test Kit comes in a compact, rugged carry-case, with adaptors to setup, adjust and test most hydraulic systems. Uses Test 20 (M16x2) test points.

The Digital Pressure Gauge Test Kit includes:

Digital gauge with direct gauge adaptor. One (1) 60″ (1524 mm) microbore hose assembly. One (1) microbore hose union. One (1) 1/8″ NPT pressure test connector. One (1) 1/4″ NPT pressure test connector. One (1) 7/16″ ORB pressure test connector. One (1) 9/16″ ORB pressure test connector. One (1) Quick Disconnect

Digital Gauge Specifications:…

$936.70
View products

With a turn of the knob, the valve allows inline sampling of system fluids without system shutdown, in little time, and without the worry of fluid contamination.

For best results, the HC-FD15 oil sampling valves should be installed in dynamic fluid lines in low pressure and return lines. If only one sampling point can be chosen, it should be in the return line, upstream of any return line filter. This will ensure a representative sample of the present condition of all components in the system.

The Aeroquip® oil sampling valve is designed for use with engine oil, lubricating oil, transmission fluid, and hydraulic fluids in mobile construction equipment, military vehicles, trucks, and stationary equipment.

Easy to Operate:
Remove the metal dust cover on the discharge port. Discharge approximately 200ml of oil to flush the sampling valve by turning the knurled knob 1/4 turn to the right. Dispose of this sample in the appropriate manner. Locate a clean oil sample…

$212.80 – $252.45
View products

WearChek Oil Sample Valves – Reliable Fluid Sampling Made Simple

Preventive maintenance is essential for extending the life of engines, transmissions, and hydraulic systems—and the easier it is to perform, the more likely it gets done. That’s where WearChek Oil Sample Valves come in.

With WearChek’s innovative push-button control, fluid sampling is fast, simple, and accurate—no system shutdown required. Just push and release to collect clean, reliable samples of engine oil, transmission fluid, or hydraulic fluids.

Key benefits of the WearChek Oil Sample Valve include:

Zero-leak performance with Double Seal construction and automatic positive closing.

Rugged, compact design with a one-piece T-shaped body for easy installation, even in tight spaces.

Compatible with return lines, blocks, oil galleries, and pilot circuits for versatile use.

By making fluid sampling quick and hassle-free, WearChek Oil Sample Valves encourage a consistent maintenance program—helping extend the service life of…

$64.50 – $72.15
View products

HydraCheck’s Oil Sampling Kit (SFSK-1) makes oil sampling easy (up to 300 PSI [20.7 bar]) with the fluid sample pump that can be used with any M16x2 test point. The kit comes with both standard and international test point connections. The mailable, oil sample bottles are also available for purchase in packs of 10 or 1.

An oil sampling kit is a valuable tool for monitoring the condition of machinery and systems. By collecting a small sample of oil and analyzing it for potential problems or issues, you can take proactive measures to prevent breakdowns and failures. This preventative maintenance can increase the lifespan of your equipment and reduce downtime, saving you time and money in the long run. Additionally, oil sampling kits can be useful for troubleshooting specific issues by identifying the root cause of problems or failures. Incorporating oil sampling into your maintenance routine can improve…

$445.00
Add to cart
Add to Quote

Fluid analysis is a crucial part of any oil management program. For your convenience, Stauff’s oil analysis bottles are pre-addressed and postage-paid mailable.

Simply take your oil sample, fill out the enclosed questionnaire, place the entire contents into the mailable bottle and drop the entire package in the mail. Your test results will be mailed directly back to you.

The test includes:

$92.44 – $924.48
View products

Stop flange size confusion in its tracks!

This immensely useful template will enable you to measure flange O.D. and flange head height. There are subtle differences between SAE Code 61, 62 and Caterpillar® flanges that are not readily identifiable. An error in application could result in an accident that could cause severe injury or death.

Assembly-line personnel, engineers, field service personnel, sales personnel and draftspersons will find this instrument invaluable in getting flange identification right the first time!

Ask about how you can get personalized templates with your company logo/name. …

$16.95
Add to cart
Add to Quote

The Gates™ International Thread Identification Kit will put an end to all your connector identification confusion and conveniently fits in your pocket.

Kit includes:

Instruction Booklet: This pocket-sized book has all the information you need to make the job of correct connector identification simple and straightforward. Instructions on exactly how to use the kit are included. Detailed illustrations help you visually identify what type of connector you have and exactly what size it is. Vernier Caliper: A compact, stainless-steel caliper measures inside and outside diameters. Thread Gauges: Two thread gauge clusters measure and identify metric and American threads. Angle Gauge: Stainless-steel angle gauge quickly and accurately measures seat angles, e.g., 37º and 45º.

 …

$132.12
Add to cart
Add to Quote

Hose, tube & pipe cleaning systems offer a fast, less invasive way to clean contaminated lines & assemblies using pneumatic technology. Perfect for mobile applications or the occasional user. The 1-1/4” launcher was designed as a cost-effective cleaning solution for handling most of the applications that are encountered every day in the workplace. The unit removes rubber dust and metal particles from the cutting process, metal flash from the crimping process, and contaminated oil from hoses, tubes, and pipes in hydraulic systems. This is all accomplished using the pneumatic launcher with the correct-sized foam projectile. We offer the launcher gun by itself or 2 economical kits to get you started.

Features & Benefits…

$295.94 – $1,319.35
View products

Cleaning hose, tube, or pipe has never been easier using our UltraClean launcher kits! Cleaning just takes seconds to perform giving you the ability to clean to ISO 13/10 levels. Hose, tube & pipe cleaning systems offer a fast, less invasive way to clean contaminated lines & assemblies using pneumatic technology.

Features & Benefits

$1,250.31 – $3,238.46
View products

Looking for a reliable and efficient way to clean hoses, tubes, pipes, and hose assemblies? Ultra Clean’s universal cleaning projectiles are engineered to remove fine particles, loose contaminants, and residue. They are also ideal for product purging in a variety of industrial applications.

How Ultra Clean Projectiles Work

Our cleaning projectiles are designed to compress against the internal surfaces of hoses, tubes, or pipes, ensuring a powerful cleaning action. Each projectile is approximately 20% to 30% larger than the internal diameter of the hose or pipe. For example, a 2-inch (50mm) projectile is recommended for cleaning a 1.5-inch (38mm) hose, providing optimal pressure and contact for debris removal.

Choosing the Right Projectile Size

Proper sizing is critical for cleaning effectiveness:

Too large: The projectile won’t exit the nozzle. Too small: Ineffective cleaning. Coupling size variations: May require size adjustments, especially for hose assemblies.

For assemblies with unique or uncommon fittings, reducing the projectile size may be necessary. All sizing recommendations…

$21.56 – $122.56
View products

All Ultra Clean tube projectiles are made from virgin materials with a specific cell structure and density. This ensures a quality product that is capable of achieving most ISO-4406-99 and ISO-4405 cleanliness levels when our assembly procedures are followed. Ultra Clean never uses rebonded, scrap, or recycled materials in our Ultra Clean Projectile offerings like some other manufacturers.

For use with all types of tubing or pipes – and strongly recommended for stainless steel – with mild to medium amounts of contamination, surface rust, or scale build-up. Ideal for removing mandrel lubricants, grease, and oil after the bending process.

The Tube style foam is denser than the standard Ultra Clean style foam and resists friction much better. Because of this, Tube Foam works much better on Stainless Steel applications.

The projectile cleans by being compressed against the internal surface of the hose, tube, or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the…

$31.92 – $77.03
View products

The Clean Seal Capsules are heat-shrinkable capsules used to seal assemblies up to 2” ID. Each capsule has a simple, clean pull-tab for easy removal. No particulates get left in the assembly and only 11 capsule sizes will handle all assemblies up through -32 (2”)!

(For use with the Clean Seal System and Heat Shrink Gun)…

$124.05 – $420.00
View products