For use with all types of tubing or pipes – and strongly recommended for stainless steel – with mild to medium amounts of contamination, surface rust, or scale build-up. Ideal for removing mandrel lubricants, grease, and oil after the bending process.

The Tube style foam is denser than the standard Ultra Clean style foam and resists friction much better. Because of this, Tube Foam works much better on Stainless Steel applications.

The projectile cleans by being compressed against the internal surface of the hose, tube, or pipe. This pressure is achieved as the projectile is approximately 20% to 30% larger than the internal diameter of the hose, tube, or pipe. For instance, a 2” (50mm) projectile is recommended for a 1-1/2” (38mm) hose.

Individual circumstances may require a smaller or larger projectile. If the projectile is too large it will not leave the nozzle, and if it is too small it will not clean effectively. The enormous variety in the…

$31.92 – $71.07
View products

The Clean Seal Capsules are heat-shrinkable capsules used to seal assemblies up to 2” ID. Each capsule has a simple, clean pull-tab for easy removal. No particulates get left in the assembly and only 11 capsule sizes will handle all assemblies up through -32 (2”)!

(For use with the Clean Seal System and Heat Shrink Gun)…

$124.05 – $210.31
View products

The Code 61 gauge port adapter allows for the connection of a pressure gauge, which can be used to monitor the pressure in a hydraulic system. This is important for ensuring that the system is operating within safe limits and can help to identify potential problems before they become more serious.

The Code 61 gauge port adapter is made from high-quality carbon steel, which provides excellent durability and resistance to corrosion. The gauge port is located on the side of the flange adapter and may be threaded or designed to accept a quick-connect fitting.

Overall, the Code 61 flange adapter with gauge port is an important component in many hydraulic systems, providing a reliable and convenient way to connect components and monitor system pressure.

Specifications:…

$76.25 – $98.87
View products

The gauge port on the Code 62 flange adapter allows for the connection of a pressure gauge, which can be used to monitor the pressure in the hydraulic system. This is important for ensuring that the system is operating within safe limits and can help to identify potential problems before they become more serious.

The Code 62 flange adapter is typically made from high-quality materials such as stainless steel or carbon steel, which provides excellent durability and resistance to corrosion. The gauge port is usually located on the side of the flange adapter and may be threaded or designed to accept a quick-connect fitting.

Overall, the Code 62 flange adapter with gauge port is an important component in many hydraulic systems, providing a reliable and convenient way to connect components and monitor system pressure.

Specifications:…

$77.78 – $157.25
View products

Ideal for monitoring pump performance and media flows in hydraulic systems.

Flows up to 150 GPM (568 Lpm). Pressures up to 6000 PSI (414 bar). Use these flow meters to setup, adjust and test hydraulic pumps, motors, cylinders and more! The only way to test a pump and motors safely and effectively is to use a flow meter.

Specifications:…

$286.00 – $1,855.00
View products

Ideal for monitoring pump performance and media flows in hydraulic systems.

Why choose a reverse flow, flow meter?
Generally, one-way flow, inline flow meters have an integral check valve assembly that prevents the oil from flowing in reverse. This feature is safe when testing hydraulic pumps, but creates a potential hazard when testing double-acting cylinders and reversible motors.

Due to area difference, when flow is restricted at the rod-end of a double-acting, single-rod cylinder, the forces can cause the pressure to increase to a hazardous level – as much as two times the pressure relief valve setting!

Flows up to 150 GPM (568 Lpm). Pressures up to 6000 PSI (414 bar). Use these flow meters to setup, adjust and test hydraulic pumps, motors, cylinders, and more! The only way to test a pump and motors safely and effectively is to use a flow meter.

Specifications:…

$356.00 – $2,130.00
View products

Ideal for testing in bi-directional applications – hydraulic cylinder testing and hydrostatic transmissions.

Flows up to 100 GPM (375 Lpm). Pressures up to 6000 PSI (414 bar). Rugged and Reliable – These meters are constructed with all metal pressure vessels that allow safe & permanent installation. Bi-Directional – Measures bi-directional flow measurement for liquids. Use these flow meters to set up, adjust, and test hydraulic pumps, motors, cylinders, and more! The only way to test a pump and motors safely and effectively is to use a flow meter.

Specifications:…

$377.33 – $1,087.73
View products

A flow meter test kit is a crucial tool for measuring the flow rate and pressure of hydraulic oil in hydraulic systems. The volumetric efficiency (internal leakage) of hydraulic pumps will increase with age. Consequently, to prevent unnecessary downtime it is vital to check the efficiency of hydraulic pumps on a routine schedule. The test kit needed to perform the test must be relatively easy to install, safe, and accurate. A flow meter test kit is ideal for testing hydraulic pumps without removing them from service. This portable test kit will give you the same result as testing your pump on a state-of-the-art test bench at a fraction of the cost.

The unit comes equipped with a load cell and pressure gauge which allows the user to load the pump in a safe manner while running tests. The variable area flowmeter on the unit provides a quick, visual flow indication on an easy-to-read linear scale to confirm that flow…

$629.00 – $2,467.00
View products

A flow meter test kit is a crucial tool for measuring the flow rate and pressure of hydraulic oil in hydraulic systems. The volumetric efficiency (internal leakage) of hydraulic pumps will increase with age. Consequently, to prevent unnecessary downtime it is vital to check the efficiency of hydraulic pumps on a routine schedule. The test kit needed to perform the test must be relatively easy to install, safe, and accurate. A flow meter test kit is ideal for testing hydraulic pumps without removing them from service. This portable test kit will give you the same result as testing your pump on a state-of-the-art test bench at a fraction of the cost.

The unit comes equipped with a load cell and pressure gauge which allows the user to load the pump in a safe manner while running tests. The variable area flowmeter on the unit provides a quick, visual flow indication on an easy-to-read linear scale to confirm that flow systems…

$724.00 – $2,879.00
View products

HydraCheck adds versatility to its range of inline flow meter test kits by adding a safety relief valve to the load-cell. This unique feature removes the risks typically associated with testing fixed-displacement pumps and single-rod, double-acting cylinders.

For example, in a fixed-displacement pump application, the pressure relief valve is typically located at some distance from the pump, e.g. at the inlet port of the directional control valve. In this case, if the load cell does not contain a safety relief valve, the user is exposed to a hazardous situation.

This problem also applies to testing single-rod, double-acting cylinders. Using a load-cell without a safety relief valve exposes the user to an extremely hazardous situation if the load-cell blocks the discharge flow from the rod-end of the cylinder and causes pressure intensification. HydraCheck’s exclusive integral safety relief valve prevents an overpressure condition when testing hydraulic components by allowing the oil to bypass the load valve at a pre-determined set pressure.

Includes:…

$2,369.00
View products

Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 6000 psi (420 bar).  The large clear 2-1/2″ (63 mm) diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.

These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimizes the effects of contamination.

The flow indicator consists of a sharp edged orifice and tapered metering piston.

The piston movement is directly proportional to flow rate and the sharp edge orifice minimizes the effects of viscosity. The piston is magnetically coupled to the rotary pointer assembly which registers on a clear 2-1/2″ (63 mm) scale displayed in Lpm and US GPM.

The FI750 flow indicators should not be installed in circuits where the flow is reversed.

Features:…

$667.00 – $955.00
View products

Our Digital Pressure Gauge Test Kit is intended to measure and display pressures in hydraulic systems. The digital gauge can display the current measured values, as well as minimum and maximum values, with an accuracy of 0,5 % of full scale.

The Digital Pressure Gauge Test Kit comes in a compact, rugged carry-case, with adaptors to setup, adjust and test most hydraulic systems. Uses Test 20 (M16x2) test points.

The Digital Pressure Gauge Test Kit includes:

Digital gauge with direct gauge adaptor. One (1) 60″ (1524 mm) microbore hose assembly. One (1) microbore hose union. One (1) 1/8″ NPT pressure test connector. One (1) 1/4″ NPT pressure test connector. One (1) 7/16″ ORB pressure test connector. One (1) 9/16″ ORB pressure test connector. One (1) Quick Disconnect

Digital Gauge Specifications:…

$936.70
View products

Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 5000 PSI, 345 bar.

The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and the setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also, lubrication and coolant systems using oil.

These direct-acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimizes the effects of contamination.

The flow indicator consists of a sharp-edged orifice and tapered metering piston.

The piston movement is directly proportional to flow rate and the sharp edge orifice minimizes the effects of viscosity. The piston is magnetically coupled to the rotary pointer assembly which registers on a clear 2 1/2” (63 mm) scale displayed in US GPM and LPM.

The FI1500 flow indicators should not be installed in circuits where…

$1,408.00 – $1,602.00
View products

The Pressure Gauge Diagnostic Tee Kit is an excellent tool for capturing pressure measurements on all types of hydraulic and pneumatic equipment, both mobile and industrial. The kit combines accurate pressure gauges along with the most common in-line adaptors for JIC and ORFS port configurations. These adaptors can be plumbed quickly to make interfacing with any system easy.

Together, the gauges and diagnostic tees provide system accessibility coupled with state-of-the-art precision measurement. The rugged case is designed to be versatile and portable. This kit is the ideal tool for any pressure sensing application. There are six (6) kits to choose from and you can get them with either Test 20 or PD series diagnostic connectors.

Each Pressure Gauge Diagnostic Tee Kit includes:…

$810.00 – $1,194.00
View products

The Digital Pressure Gauge Diagnostic Tee Kit is an excellent tool for capturing pressure measurements on all types of hydraulic and pneumatic equipment, both mobile and industrial. The kit combines accurate digital pressure gauges along with the most common in-line adaptors for JIC and ORFS port configurations. These adaptors can be plumbed quickly to make interfacing with any system easy.

$1,667.00 – $3,660.00
View products

The RFIK mechanical hydraulic tester offers the perfect solution for troubleshooting and servicing hydraulic systems on agricultural and other mobile machinery. The kit consists of a direct-acting flow indicator with a built-in thermometer, a loading valve, and a pressure gauge all built into a strong steel case with a removable lid for protection.

The volumetric efficiency (internal leakage) of hydraulic pumps will increase with age. Consequently, to prevent unnecessary downtime it is vital to check the efficiency of hydraulic pumps on a routine schedule. An analog flow indicator with an integrated load valve and an analog pressure gauge in one compact unit is perfect for testing hydraulic pumps without removing them from service.

The unit is self-contained and requires no electrical power. The dials are clear and easy to read. Installation is extremely simple, and the test kit can be connected to either the pressure or return lines. The loading valve and pressure gauge allow a progressive buildup…

$1,920.00 – $2,552.00
View products

The DHT Digital Hydraulic Tester accurately measures oil flow, pressure, and temperature and has a built-in loading valve to simulate the working pressure during normal machine operation. The tester is ideal for reactive, proactive, and preventive maintenance, designed to conveniently check the performance of hydraulic pumps, motors, valves, and hydrostatic transmissions as well as the setup of hydraulic attachments such as hammers and breakers.

$3,874.86 – $5,782.59
View products

The volumetric efficiency (internal leakage) of hydraulic pumps will increase with age. Consequently, to prevent unnecessary downtime it is vital to check the efficiency of hydraulic pumps on a routine schedule. The test kit needed to perform the test must be relatively easy to install, safe, and accurate. The DHM 4 Series Bi-Directional Digital Hydraulic Multimeter is perfect for the task. The unit offers precise flow, pressure, temperature, power, and volumetric efficiency readings in a compact configuration.

The DHM 4 Series Digital Hydraulic Multimeter is an all-in-one unit designed to test the performance of hydraulic pumps, motors, valves, and hydrostatic transmissions with the added benefit of Bluetooth functionality.

This new generation of testers, aimed at hydraulic field service engineers everywhere, enables you to easily measure the true performance of your hydraulic system, pinpoint faults, and lets you quickly email a test report in just a few presses of your iOS smartphone, using Smart Bluetooth™ functionality and the free-to-download Webtec QuickCert™…

$5,538.00 – $6,882.00
View products

The PFM6 Series is a compact, lightweight portable tester designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components. These self-contained testers feature laboratory accuracy and provide flow, pressure, and temperature measurements simultaneously from one point. Designed for testing pumps, valves, cylinders, motors, hydrostatic or power shift transmissions, and power steering systems in both mobile and stationary applications, these compact units utilize turbine flow meter technology. The units are offered in one-way or bi-directional flow options depending on your application. They offer precise flow, pressure, and temperature readings in a compact configuration.

Simple operation includes a toggle switch to display either flow or temperature readings and a loading valve that operates with fingertip control. The dual scale helical tube pressure gauge offers pulsation dampening and high overpressure capacity. For safe operation, all testers include an internal pressure relief system.

Features:…

$3,772.00 – $5,950.00
View products

HydraCheck developed the Universal Pressure Gauge Diagnostic Tee Kit because we wanted to give hydraulic technicians one kit that has all the pressure gauges and gauge port adapters needed for checking a broad variety of pressures. Having the right pressure only solves half the problem though. There is nothing more frustrating than trying to get in line with your pressure gauge and not being able to. The Pressure Gauge Diagnostic Tee Kit includes all the connectors one needs to connect to various diagnostic couplings and port connections.

$2,685.50 – $4,460.25
View products

HydraCheck developed the Universal Pressure Gauge Diagnostic Tee/Adapter Kit with Oil Sampling because we wanted to give hydraulic technicians one kit that has all the pressure gauges needed for checking a broad variety of pressures. Having the right pressure only solves half the problem though. There is nothing more frustrating than trying to connect a pressure gauge to endless varieties of connectors. The Pressure Gauge Diagnostic Tee/Adapter Kit with Oil Sampling includes all the connectors one needs to connect to a variety of diagnostic couplings and port connections.

The kit can come with either five (5) analog pressure gauges or four (4) digital pressure gauges for checking open and closed loop systems. This versatile kit contains gauge port adapters, which connect seamlessly to a wide variety of adapters, which includes JIC, ORFS, BSPP, JIS and Komatsu. Want to change the kit around? No problem! Give us a call, and we will provide you with a kit that is tailored to…

$4,865.15 – $6,727.35
View products